TECH SPECS

Overall Size: 31.57” x 19.76” x 4.68”

Core Size: 24.92" x 17.24"

Rows: 2

Inlet: 1.57"

Outlet: 1.77"

Core Thickness: 1.57"

Drain Plug Thread Size: M12 x 1.5

Purchase Includes: Mishimoto Radiator / Magnetic Drain Plug w/ Dowty Oil Seal / Left & Right Brackets / (4) - Rubber Bushings & Metal Collars / (4) - M8 Flange Head Bolts / (4) - M8 Washers / Limited Lifetime Warranty

Fits: Ford Mustang Cobra 97-01 / Ford Mustang Bullitt 2001 / Ford Mustang Mach 1 03-04 /
Engine Codes: 289ci (4.6L)

Chassis Codes: SN-95

Note: V8 Applications only

LIFETIME WARRANTY

Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.

A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.

The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid.

MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products.

Accident Protection

Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.

Fitment Disclaimer

All Mishimoto products are engineered to fit with OEM applications, as well as other Mishimoto products.

Mishimoto will not be held responsible for fitment issues caused by attempted installation of additional aftermarket parts. This includes, but is not limited to, performance parts and any other non-OEM replacement parts. Fitment with different brands cannot be guaranteed.

Furthermore, Mishimoto will not be held responsible for fitment issues caused by an accident. Many times, clearances needed for installation are very strict. If a vehicle has been involved in a front-end accident, available space for a product such as a thicker aluminum radiator may be compromised.

For all warranty claims, please contact us.

Installation Instructions

              Prep Mishimoto Radiator For Install

1. Begin by preparing the Mishimoto radiator; install the rubber bushings into the bracjets.

2. Next install the metal collars into the rubber bushings.

3. Bolts brackets to the radiator using the supplied hardware and 13mm. socket. One bracket will have a large hole on the end; this will sreate easy access to the radiator drain plug.

4. The radiator assembly is now aomplate; it will look like the image below.

Removing The Radiator

1. First jack yhe vehicle up and place it safely on jack stands.

2. Disconnect the negative terminal on the battery.

3. Next locate the radiator drain plug in the passenger side of the radiator and drain all coolant. Remove the coolant reservoir cap to speed up the draining process.

4. Remove the overflow hose from the reservoir lank.

5. Remove the bolts holding the overflow tank to the radiator support. Remove the overflow reservoir from the vehicle.

6. Remove the upper radiator hose.

7. Disconnect the lower radiator hose.

8. For vehicle with automatic transmissions, remove the transmission cooler lines from the radiator at this time.

9. Next upling the harness from the cooling fan shround.

10. Remove both upper radiator mounts, which are secured by 8mm. bolts.

11. Remove the radiator and fan shtound assembly from the vehicle.